Drip Irrigation tape
Emitting pipes (Seam drip irrigation tape)
Emitting pipes (tape)
Name of manufacture: DARAKAR
Spacing of emitting unit: 20±5% cm
Nominal diameter: 16.5 ±0.3 mm
Minimum of pipe wall thickness within an allowable deviation of not more than -10% (µm): 175
Nominal flow rate in l/h within an allowable deviation of not more than 7% at nominal pressure 1 bar:
2.5☐ 2.7 ☐ 2.9 ☐ 3 ☐
Working pressure in multiples of 100 kPa units: 0.6-1☐ 0.6-1.2☐
Coefficient (K) and emitting exponent (m) of emitting unit: 0.6±5%, 0.17
Maximum allowable tensile resistance: 160 N
Length of emitting pipe in coil: 1000 +5 m
Type of pressure regulation: unregulated emitting pipe
Type of working at low pressure: normal
Usage Duration: one season (non-reusable emitting pipe)
Emitting pipes (tape)
Name of manufacture: DARAKAR
Spacing of emitting unit: 20±5% cm
Nominal diameter: 16.5 ±0.3 mm
Minimum of pipe wall thickness within an allowable deviation of not more than -10% (µm): 175
Nominal flow rate in l/h within an allowable deviation of not more than 7% at nominal pressure 1 bar:
2.5☐ 2.7 ☐ 2.9 ☐ 3 ☐
Working pressure in multiples of 100 kPa units: 0.6-1☐ 0.6-1.2☐
Coefficient (K) and emitting exponent (m) of emitting unit: 0.6±5%, 0.17
Maximum allowable tensile resistance: 160 N
Length of emitting pipe in coil: 1000 +5 m
Type of pressure regulation: unregulated emitting pipe
Type of working at low pressure: normal
Usage Duration: one season (non-reusable emitting pipe)